Miller arrow 40 Посібник оператора - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник оператора для Аксесуари для фотоапаратів Miller arrow 40. Miller arrow 40 13 сторінок. Fluid head

Maintenance

The Arrow 40/55 Fluid Head offers high quality surface

coatings, dust and moisture seals. Miller recommends

keeping the Fluid Head clean at all times by using soft brushes

and lint free cloth to wipe over the surfaces.

Do not immerse the Fluid Head in any liquid.

◗

Do not use stiff brushes, abrasives, harsh detergents and

◗

solvents.

The Arrow 40/55 Fluid Head uses a single GP23A type - 12

Volt battery for Illumination. Miller recommends the following

batteries to provide long life performance – Duracell MN21/23,

Eveready A23 or Vinnic L1028.

Using a Phillips Head #1 screw driver, remove the two

◗

RETAINING SCREWs, BATTERY DOOR and the old battery.

Insert the new battery as shown in ﬁgure 10.

◗

Insert the tab on the BATTERY DOOR into the body ﬁrst then

◗

align the two screw holes and tighten the screws snugly.

Illumination Button

Fig. 10

Battery

Retaining Screw

Battery Door