Miller DS-60 Fluid head Посібник оператора

Переглянути онлайн або завантажити pdf Посібник оператора для Аксесуари для фотоапаратів Miller DS-60 Fluid head. Miller DS-60 Fluid head 2 сторінки. Camera stand

Друкувати сторінку
Miller DS-60 Fluid head Посібник оператора
ACCESSORIES & COMPONENTS
Description
Cat#
Camera Plate Assembly (EURO)
#1060
3/8"w Camera Screw
P0037
Handle Clamp Assembly
P3810
Telescopic Pan Handle
#690
Eyepiece Leveller Adaptor
#383
Ø150 M12 Clamp Nut Assembly
P5114
9V Battery
P5901
WARRANTY
3 year parts and labour warranty.Please refer to warranty
card for complete details.
SERVICE, SALES & SUPPORT
Miller Authorised Service Agents must carry out all service and repair work.
Failure to observe this requirement may void warranty. It is advisable to
notify Miller or a MIller Authorised Service Agent if a change of performance
is observed as a result of dropping or rough usage. For information regarding
sales and service of Miller products, or for your nearest Miller representative
please contact us via www.millertripods.com or at the following:
MILLER CAMERA SUPPORT EQUIPMENT
MILLER CAMERA SUPPORT LLC (USA)
30 Hotham Parade, Artarmon, Sydney
218 Little Falls Road, Cedar Grove,
NSW 2064 Australia
New Jersey 07009-1231 USA
Tel: +61 2 9439 6377
Tel: (973) 857 8300
Fax: +61 2 9438 2819
Fax: (973) 857 8188
MILLER FLUID HEADS (Europe) LTD.
MILLER TRIPODS Canada
Unit A2, Ford Lane Industrial Estate
1055 Granville Street
Ford Lane, Ford
Vancouver BC V6Z1L4, Canada
West Sussex BN18 0DF, United Kingdom
Tel: (604) 685 4654
Tel: +44 (0) 1243 555 255
Fax: (604) 685 5648
Fax:+44 (0) 1243 555 001
WEBSITE www.millertripods.com
D5190-2 04/06
FEATURES AND CONTROLS
Camera Screws
Camera Plate
Sliding Platform
Quick Release
Tilt Lock
Counterbalance
Tilt Drag
Control
Eyepiece Leveller
Bubble Level
Mount
Pan Drag Control
Stud
Clamp Nut
(M12)
Fig 1.
INTRODUCTION
The Miller DS60 fluid head offers robust and versatile 150mm ball levelling
or Flat Base support in a portable system. The DS60 features 4-position
counterbalance plus 4-position selectable pan/tilt drag to support payloads
from 15-30kg (30-66lb). With rear mounted main controls, a quick-release
Euro camera plate and tilt safety lock, the DS60 is designed for operator
ease. The 'true' fluid drag action complements these features to deliver
seamless transitions under all studio and location conditions.
SAFETY INSTRUCTIONS
• Before operation please read the operating instructions.
• This Fluid Head has been designed to be operated by qualified camera
operators.
• Ensure Tripod is set-up for maximum stability and is stable.
• Hold camera securely during all levelling, balancing or removing opera-
tions.
• Ensure sliding platform is locked before tilting fluid head from horizontal •
Lock fluid head in horizontal position using the tilt safety lock before fitting
or removing payload, or whenever operator leaves the system.
• Do not adjust the counterbalance or drag settings without securing (hold-
ing) the pan handle.
• Do not release the TILT LOCK without holding the PAN HANDLE to prevent
accidental or sudden movement.
• Do not release the clamp nut without holdng either the head or the at-
tached camera.
• Do not exceed the maximum total payload of 30kg. (66lb)
Slide Lock
Pan Handle Clamp
Lever
Telescopic Clamp
Safety Tab
Pan Handle
Tilt Safety Lock
Selectors
Pan Lock
Flat Base
(Mitchell Type)
Clamp Stud
(3/8")
Ball Base
(150mm)
Fig 2.
TECHNICAL DATA
Weight
6.1kg (13lb)
Height
210mm (8.2")
Width
260mm (10.2")
Depth
200mm (7.8")
Max Payload Capacity
30kg (66lb) (see CB Graph)
Mounting
150mm ball levelling (1003), or
Flat Base (1004)
Pan Drag
4-position selectable fluid drag
Pan Range
360°
Pan Lock
Positive lock calliper brake
Tilt Drag
4-position selectable fluid drag
Tilt Range
+75°/-75°
Tilt Lock
Positive lock calliper brake
Safety Lock
Steel pin tilt brake calliper lock
Counterbalance System
4-position
Counterbalance Range
15-30kg (30-66lb) (see CB graph)
Camera Plate
QR Euro Plate - 80mmW x 120mmL
Camera Platform
100mm (+50/-50mm) Sliding range