Miller DS20 Посібник оператора - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник оператора для Аксесуари для фотоапаратів Miller DS20. Miller DS20 9 сторінок. Fluid head

Operating Instructions

3. Counterbalance

Control

The counterbalance system was designed to neutralise the effect

of the camera weight when it is tilted. The DS10 & DS20 Fluid

Head offers a 2 position counterbalance system which can be

operated via the COUNTERBALANCE SELECTOR (Fig. 2 & 3). The

DS5 Fluid Head has a single position Counterbalance system and

is preset. The COUNTERBALANCE SELECTOR must be operated

when the SLIDING PLATFORM is in a horizontal position. After

changing the Counterbalance setting it may be necessary to tilt

the camera back and forth to ensure that the CB spring has

engaged. The camera must be held securely while changing the

Counterbalance setting.

3.1 For safety ensure that Counterbalance position 2 is selected.

3.2 Hold the camera and release the TILT LOCK, then gently tilt

the camera from a horizontal position forward then backward

and observe its response. If the Camera 'Springs Back' to the

horizontal position then select

Counterbalance position 1.

Correct Counterbalance

setting has been achieved

when minimum effort is

required to move the camera

over the entire tilt range.

TIP Fine tuning can be achieved

by adjusting the SLIDING

PLATFORM - see step 2.5.

Fig 2

DS10 CB Selector

4. Pan / Tilt Lock

Control

The DS5/DS10/DS20 Fluid Head offers high

capacity calliper disc brake system to hold the

Fluid Head in a fixed pan and/or tilt position.

Camera position will not change when applying or

releasing the Pan / Tilt locks.

◗ Do not pan or tilt the Fluid Head whilst the PAN or the TILT LOCK

is partially applied.

Fig 3

DS20 CB

Selector