Miller T94 Series Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для мотоциклів Miller T94 Series. Miller T94 Series 40 сторінок. Auto-darkening helmets
Також для Miller T94 Series: Посібник (32 сторінок)

Друкувати сторінку

5-5.

Variable Shade Control

1 Mode Button

2 Increase (+) And Decrease (-) Buttons

Use the + and - adjustment buttons to adjust

the lens shade in the darkened state. Use

the table in Section 1-4 to select proper

shade control setting based on your welding

process. The shade ranges for each mode

are as follows:

Weld - No. 8 - No. 13 (XL Models No. 8 –

No. 14)

Cut - No. 5 - No. 8

Grind - No. 3 only

(R)

MEMO ( B )

X-Mode - No. 8 - No. 13 (XL Models No. 8 –

No. 14)

Start at the highest setting and adjust lighter

to suit the application and your personal

preference.

Variable Shade Adjustment Procedure

� Press Mode (On/Off) button to turn lens

On. Helmet control display will appear.

� Press Mode Button to select desired

function: Weld, Cut, or X-Mode.

� Use + and – adjustment buttons to se-

lect desired shade.

� Begin welding or continue with other

lens adjustments.

OM-255503 Page 15