AquaOne CHJ-502 Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Системи фільтрації води AquaOne CHJ-502. AquaOne CHJ-502 11 сторінок. Internal filter
Друкувати сторінкуPlacing in service
1. Read and familiarize yourself with the safety instructions before placing
in service.
2.Compare the line voltage(V) and frequency (HZ) of your electrical circuit
with the data on the model plate. These data must agree.
3.Attention after installing, adjust the tightness of cover to change the
fountain style.
4.Comply with the maximum permitted immersion depth (see the
information on the model plate).
5.Do not place the pump directly in the pond floor mud, place the pump on
a raised surface.
6.Lay the power cord in a protected manner to exclude the possibility, of
damage.
7.Connect the pump to the electrical circuit.
8.The flow rate can be adjusted by the control valve; the pump will start
work once plug in and stop once unplug.
lmportant note
Never operate the pump without the filter basket. The filter basket protects
the pump from coarse dirt that can lead to plugging up the pump.
Never operate the pump without water (dry run). The pump bearing will be
destroyed.
Additional installation instructions
1. Our specified outputs are always measured directly at the pump outlet
(without hose connection and accessories).
2. To achieve the highest possible pump output, keep the hose connections
as short as possible. Elbows, angles and other connecting elements
should be reduced to a minimum, as they lessen the pump output.
3. Because of the different product models, equipped with different outlets.
Part products are equipped with stepped water outlets. To avoid flow
lass, the unused water outlet connectors should be sawed off at the
corresponding positions on the stepped hose.
www.aquaristikwelt24.de
| 8
S e i t e
By Aquaristikwelt24