ABB EZClean Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Промислове обладнання ABB EZClean. ABB EZClean 16 сторінок. Compressed air supply unit
Друкувати сторінкуE Z C L E A N | C O M P R E S S E D A I R S U P P LY U N I T | O I/ E ZC L E A N - E N R E V. A
Handrail/wall-mounting
This procedure is for handrail/wall-mounting using the optional
compressor unit handrail-mounting kit. When choosing the
mounting location, leave sufficient space in front of the
enclosure to open the door fully (>485 mm [>19.1 in]) .
NOTICE
Optional compressor mounting extension plates (
Figure 3 [2 supplied with handrail mounting kit]) can be
attached to handrail mounting plates if required.
Dimensions in mm (in)
330
(13.0)
395
(15.5)
205
(8.1)**
Figure 3 Handrail-mounting
*Mounting plates
A
, U-bolts
Arrangements above shown for example only.
**485 (19.1) with door open
D
in
E
and extension plates
D
Referring to Figure 3:
1 Fit the four handrail mounting plates
unit
B
in the required plane and secure each plate with one
M6 screw
C
(supplied).
If optional extension mounting plates
attach to the handrail mounting plate(s) in the required
plane using two M6 bolts/washers/nuts (supplied) per plate.
2 Position the compressor unit
using the U-bolts
*
*
(10.3)
can be fitted horizontally or vertically in each corner of the enclosure.
A
to the compressor
D
B
on the handrail and secure
E
and M8 nuts/washers
50 (1.9) U-bolt / 210 (8.3) + 25 (1.0)
42 (1.6) U-bolt / 210 (8.3) + 21 (0.8)
385
(10.1)
262
195
(7.67)
486
(19.1)
70 (2.75)
7
are required,
F
(supplied).
420
(16.5)
170
(6.70)
*
*