Aquapeutics S6 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Сантехніка для ванної кімнати Aquapeutics S6. Aquapeutics S6 9 сторінок. Wellness steam shower cabins
Друкувати сторінкуWellness Steam Shower Cabins (S6)
Control Parts Information for steam Cabin
Steam Temperature Sensor
1
2
LCD Display
3
Control Panel
4
Water Diverter
A. Water Volume Adjustment
5
B. Vitamin dispenser
Notes：A: Thermostatic faucet
B: VC faucet
007
A. Water Temperature Adjustment
6
B. Water Volume Adjustment
7
Back Massage Jet
8
Steam Outlet
9
Hand Shower Set
Steam Generator
10
Cleaning Liquid lnlet
Power on/off
Push any button to light the display and （Picture 1） shows on screen. Push power on/off button
now to start the system and （Picture 2） shows on the display. Push power on/off button again to
shut off the system. The display and background light for push buttons are turned off. The drain
valve for steam generator keeps on for 1 minute.
Picture 1
Steam temprature setting
Keep on pushing this button and （Picture 3）
shows on display. The figure of temperature is
changing from 20 to 59 circularly. Loosen the
button when the figure reaches the desired
temperature and the figure is set as steam
setting temperature. The steam generator
stops working when the temperature inside
steam cabin is higher than setting temperature.
The steam generator starts working automati-
cally when the temperature is lower than setting
temperature.
The
default
steam
setting
temperature is 45 C/113F if the user does not
make any steam temperature setting.
Picture 2
Picture 3
008