AQUAPHOR DWM-203 Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Системи фільтрації води AQUAPHOR DWM-203. AQUAPHOR DWM-203 16 сторінок.

6. DWM-203 run

Step 1. Connection of delivery

pipes

• Connect the delivery pipes according to the

diagram shown in fig. 9.

Step 2. DWM-203

preoperational phase

• Remove the film wrapper from the

modules.

• Remove the slipping plugs from the modules (if any).

• Rinse the O-rings of the modules under water.

• To install the module, insert it into the appropriate

collector until it stops and turn to the right along the arrow,

as shown in fig. 10a, until it clicks.

• To detach the module, push the stop button all the way

to the stop and, while holding it, turn the filter module to

the left in the direction of the arrow, as shown in fig. 10b

and remove it.

• Install modules and utility blind flange, as shown in fig. 11.

• Insert the plug of electric power supply into a socket, and

the jack plug from the power supply to the DWM-203

connector (fig. 12).

Utility blind flanges

(supplied) (12, fig. 1)

From

junction point

Fig. 10а

К5

К2

Fig. 11

To the

drainage collar

To the tap

with clean

water

Fig. 9

Fig. 10b

Fig. 12