BURL B16-BMB5 MOTHERSHIP Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Шасі BURL B16-BMB5 MOTHERSHIP. BURL B16-BMB5 MOTHERSHIP 11 сторінок.

1.5 Attach power cable and ribbon cables to faceplates

red

The

wire should be closest to the

faceplates. (See image 6, below)

Note:

BAD8 Daughter Cards have a ribbon cable only.

Always make sure the

low)

Image 5: Insert the Daughter Card

into the card guides. Make sure the

metal Daughter Card backplate, not

PCB, is inserted into the card guides.

1.6 Attach lid with all screws

1.7 Install vent above B16 Mothership

Image 7: B16 MOTHERSHIP with 1U vent above for proper airflow.

Image 4: Rear view, configuration for 8 in, 8 out.

orange

2-pin connector is attached properly. (See Image 6, be-

Section 1

orange

power connector for BAD4/BDA8

Image 6: Attach the ribbon cable

and 2 pin connector for BAD4

and BDA8 to the front panel.