BURL BMB1 Rev C Rom 2 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Музичне обладнання BURL BMB1 Rev C Rom 2. BURL BMB1 Rev C Rom 2 7 сторінок.
Друкувати сторінку1.4 Install Vents
Image 12: B16 MOTHERSHIP with 1U vent above for proper airflow.
Important Installation Notes:
1.
Install the 1U vents above the B16 chassis. The MOTHERSHIP MUST run with proper
ventilation.
2.
Failure to properly vent the MOTHERSHIP chassis above and below may cause failure,
and will void the warranty.
1.5 Connect Digilink Port 1 to Core Card
•
Each Digilink Port on the BMB1 can run up to 32 ins/outs.
•
If you have 32 I/O or less, you only need to use port 1.
•
If you have more than 32 I/O, use ports 1 and 2.
•
Both Ports on the BMB1 are primary ports.
1.6 Set BMB1 Front Panel to DAW for use with Pro Tools
•
When using B16 internal clock, set the CLOCK CONTROL to DAW, which
allows Pro Tools to change sample rate.
•
If using external clock, set to EXT.
B16-BMB1
5