AquaPRO 62041 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Водяний насос AquaPRO 62041. AquaPRO 62041 11 сторінок. Automatic booster pump
Друкувати сторінку
TOOLS REQUIRED
Flathead
Screwdriver
Safety goggles
MATERIALS REQUIRED (NOT INCLUDED)
Discharge tee
Threaded adapter
Ball valve
Union
SPECIFICATIONS
POWER SUPPLY
LIQUID TEMP. RANGE
DISCHARGE
SUCTION
WATER LEVEL
INSTALLATION
CAUTION: Risk of flooding. Be sure that all plumbing and fittings are rated to withstand the system pressure which you
expect the pump to generate.
1.
Decide what's the best place to install the pump. Think about these things:
it must be near the main water supply line
the pump must be accessible
the power cord must reach a power outlet
the controller's LED lights must be visible
ease of plumbing
space saving
NOTE: Installation of a low pressure safety cutoff switch on the pump discharge is recommended (and may be required by
your local code) to shut off the power in case of low discharge pressure (caused by broken pipe, etc.).
2.
Mount the pump on a solid base in the location you have decided on.
3.
Choose a time that will allow you to shut off the water to the household while you install the Pump.
4.
Shutoff the main water supply valve to the household.
5.
Open any faucet to relieve water pressure in the plumbing. Once the water pressure is relieved, close the faucet.
Phillips
Screwdriver
Tape Measure
Pipe
Elbow
Check valve
115V,60HZ,20Amp circuit
32°F to 77°F (0°- 25°C)
1in.NPT
1in. NPT
25 ft.
Pipe wrench
Thread Tape
4
Hacksaw
PVC glue