CHROMOFLEX Pro 66000042 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пульт дистанційного керування CHROMOFLEX Pro 66000042. CHROMOFLEX Pro 66000042 6 сторінок. 1/2 channel

Друкувати сторінку

English

Instruction manual for

Please read this manual carefully and keep it in a save place!

Item-no. 66000027: 2 channel remote control (for use with following

66000047

Item-no. 66000028: 1 channel remote control (for use with following

66000048

1. Introduction

CHROMOFLEX

Pro

is an advancement of

2 channels (for modern dynamic white LEDs - item no. 66000032/66000042) and is totally radio controlled.

For control and settings either

USB dongle (for PC/Art. 66000036) are necessary.

CHROMOFLEX

Pro

was designed so that sophisticated illuminations in the field of decoration and wellness

can be attained even without programming. The unit is equipped with various effects by default which can be

edited or set as standard effects by radio control.

Several

CHROMOFLEX

automatically. Therefore sophisticated illuminations can be attained with a minimum of effort. Operating range

depends on room conditions. Operation of up to 300 metres should be possible outdoors. Indoors an operating

range of 20- 50 metres should be unproblematic.

2. Usage

Colours and effects of the

be stored on the

CHROMOFLEX

as start programme.

For operation the remote control is equipped with solid-state touch buttons / slider.

CHROMOFLEX

Pro

series operates on a frequency of 868.3 MHz (licence-free in EU, Switzerland, Norway

and Iceland).

3. Technical data

Operating voltage: 3V DC

Batteries: 1 * 3V button cell CR2032

Protection class: III

Measures (L/W/H): 104 / 67 / 28mm

Ambient temperature: 0°C - max. +50°C (in dry conditions only, non-condensing)

Radio frequency: 868.3MHz (licence-free in EC, Switzerland, Norway and Iceland).

Manufacturer: Josef Barthelme GmbH & Co. KG

4. Safety instructions

The unit is equipped with a built-in protection against reverse polarity. Connecting the power in reverse polarity

can destroy the module, even if connected for a short time only.

Please remove and replace empty batteries because they could leak.

We decline any liability, loss or damage caused by improperly used modules! Guarantee is also lost in such cases.

This product is not a toy, keep away from children!

5. Operation

Please operate this unit only when it is working properly.

In case of an error, switch off the unit immediately. Do not operate the unit, until the unit was verified electronically

by a qualified electrician.

A case of error is:

- Visible signs of damage on the unit

- The unit is not operating properly

- fume rising or crackling sounds from the unit

- Visible signs of overheating

5.1 Start-up

Please insert 3V button cell into the remote control. Therefore, the screws on the back of the remote control have

to be loosened. Please insert the batteries with correct polarity, because otherwise the remote control may be

damaged (guarantee is lost in such a case). Close housing again. The red LED on the right side will flicker for any

5 seconds.

V1.1 / 13.01.2015

CHROMOFLEX

66000032; 66000042; 66000342)

66000031; 66000041; 66000341)

CHROMOFLEX

Pro

can be linked in a network, whereas all colours are in sync within the network

can be controlled by remote control. Settings being made can

CHROMOFLEX

Pro

. After reconnecting the supply voltage, the desired colour or effect is set

Pro

CHROMOFLEX

I, II and RC. The PRO version consists of up to

remote control (Art. 66000047) or

4 / 6

Series

Pro/Pro File

CHROMOFLEX

Remote

CHROMOFLEX

Pro

units:

Pro