Burley ENCORE Посібник користувача - Сторінка 12

Grease the wheel-pivot assembly twice a year (monthly under

wet, dirty, salty conditions). Use a standard grease gun with multi-

purpose (thick brown, or green) grease and insert into the hole on

pivot casing (1). Wipe clean all the old grease that ﬂ ushes out. This

can be done by your local bike shop or gas station while you wait.

Inspect handle, receivers, parking brake and wheel pivot monthly.

Replace any loose or damaged parts.

Burley Walk n' Roller Limited Warranty

Burley will repair or replace any Walk n' Roller parts it determines to be

defective for the life of the trailer. The owner of a Burley trailer with Walk n'

Roller parts installed must present the trailer for repair at an authorized Burley

dealer, together with an original sales receipt or similar proof of purchase.

This warranty applies to the original owner and is non-transferable. Burley

cannot be responsible for failure due to improper assembly, modiﬁ cation

of parts or instructions, neglect, abuse, accident, and/or normal wear.

The warranty does not cover any trailers used for rental, competition, or

commercial use, nor does it cover Walk n' Roller parts used on anything

other than a Burley trailer.

Burley neither assumes nor authorizes any person to assume any other

liability in connection with Burley trailers, and there are no oral agreements

or warranties collateral to or affecting this agreement.

This warranty gives you speciﬁ c legal rights. You may also have other rights

which vary from state to state.

4020 Stewart Road • Eugene, Oregon 97402 USA

(541) 687-1644 • Fax (541) 687-0436

"Burley" is a registered trademark of Burley Design Cooperative

Burley d'Lite is a trademark of Burley Design Cooperative

Burley Encore is a trademark of Burley Design Cooperative

Burley Lite is a trademark of Burley Design Cooperative

Burley Design Cooperative

www.burley.com

rev: 10/04