Chronologic uAttend MN2000 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Діапазони Chronologic uAttend MN2000. Chronologic uAttend MN2000 16 сторінок. Range of clocking terminals
Друкувати сторінку
Follow these steps on each Timeclock that you selected to receive the templates:
1.
Tap the Menu key.
2.
Enter the default password (53178) if it has not been changed, then tap OK.
3.
Select the Template menu.
4.
Select Download Templates.
5.
Tap OK.
6.
Wait for the templates to download to the Timeclock.
7.
Tap Exit to return to the Home Screen
8.
Your selected Employees can now clock on this Timeclock
9.0 Troubleshooting
See the following table for help with error messages you might encounter with the Timeclock.
ERROR MESSAGE
DEVICE ID ERROR—
PLEASE LINK TO
ACCOUNT
NET NOT FOUND
SORRY, DEALER ID NOT
FOUND
UNSUCCESSFUL LOGIN
SORRY, USER NOT FOUND
SORRY, USER NOT
VERIFIED
SERVER CONNECTION
ERROR
DNS ERROR
DHCP ERROR
DHCP UNAVAILABLE
This message displays when the Timeclock has not been linked to a
uAttend account. Please refer to Section 6 of this guide.
This message displays if the Timeclock is not currently plugged into
any networking device, or the networking device it is plugged into is
turned off or is not functioning correctly.
Trackmytime.co.uk will report this error if the Dealer ID you entered
is not valid. Please contact your dealer representative for assistance.
When you attempt to log in to trackmytime.co.uk, the login form
refreshes. This indicates that the username/password combination
that you entered was not correct.
If you have forgotten your username and/or password, click on the
Email username/password link at the top of the page.
This message displays if a user attempts to clock in, but their facial
recognition ID has not been assigned to their user profile.
This message displays if a user attempts to clock in, but the system
cannot match the facial features to a stored facial recognition
template.
This message displays if the Timeclock is unable to communicate with
our uAttend servers due to a firewall, content filter, or any other kind
of possible network block.
This message displays if the Timeclock does not have a valid DNS
server IP address to use for name resolution, or the DNS server it is
contacting cannot properly resolve our host name for our uAttend
servers. Current FQDN is, ws.trackmytime.com
This message displays if the Timeclock does not receive proper IP
address information provided to it from a DHCP server.
This message displays if the Timeclock receives no responses when
attempting to contact a DHCP server.
15
NOTES