Diamond FVS-711/TS Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Духовка. Diamond FVS-711/TS. Diamond FVS-711/TS 12 сторінок.

Друкувати сторінку

FOREWORD

The contents of this manual are generic and not all the functions described may be available on your

product.

The manufacturer declines all responsibility for possible inaccuracies contained in this pamphlet, due to printing

or copy errors. We reserve the right to make on our own products those changes to be considered necessary or

useful, without jeopardizing the essential characteristics.

Read the instructions for use very carefully paying particular attention to the rules concerning safety devices. This

appliance must only be used for what it has been designed for and built for and that is: all baking of dishes and

regenerating pre-cooked and/or frozen food.

WARNING!

Before making any type of connection of this equipment (electrical or hydraulic), carefully read the instructions

in this manual. This manual must be carefully kept to be available for future reference by users or service tech-

nicians. Installation must be carried out by d qualified personnel only.

1.0 DECLARATION OF CONFORMITY

The Manufacturer declares that the appliances conform to the EEC norms.

They must be installed in accordance with current standards, especially regarding aeration of the premises and

the exhaust gas evacuation system.

Note: The Manufacturer declines all and every responsibility for any direct damages caused by: an

incorrect use, wrong installation or bad maintenance.

1.1 EUROPEAN DIRECTIVE ROHS 2012/19/UE

This appliance is marked according to the European directive 2012/19/UE on Waste Electrical and Electronic

Equipment (WEEE). By ensuring this product is disposed correctly, you will help prevent potential negative con-

sequences for the environment and human health, which could otherwise be caused by inappropriate waste han-

dling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that this

appliance may not be treated as household waste.

Instead it shall be handed over to the applicable collection point for the recycling of electrical

and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste dis-

posal.

1.3 TRANSPORT OF THE OVEN AND PACKAGING REMOVAL

Upon receipt of the oven and before installing it, check the packaging is intact and there are not visible damages.

Also check that along with the oven you receive also the documentation, consisting of:

•

Instructions for installation, use and maintenance

•

Chart to check correct installation

•

Wiring diagram

•

Label ISO 3864-1

Before bringing the oven to the point, where it must be installed, check the following:

The doors are large enough to allow passage of the oven

The floor supports the weight.

According to the model of oven, its dimensions and its weight, use suitable facilities to handle goods during trans-

port and installation, able to guarantee stability in order to avoid overturning, falls or uncontrolled movements of

the appliance or its components.

Keep the oven packed until you reach the site where the oven is going to be installed.

The packaging makes the handling of goods easier and protects the oven from accidental push.

During moving and installation of the oven, the installer must comply with accident-prevention regulations in

force at the place of installation (use of safety shoes, gloves, etc.) Remove the packaging taking care not to dam-

age the oven. The adhesive film, that protects the surfaces made of stainless steel can be removed also after you

have positioned the oven on the corresponding stand or the support surface.

ATTENTION: Packaging materials and adhesive film are potentially dangerous.

For this reason, they must be kept out of the reach of children and properly disposed of in com-

pliance with local directives.

You should separate packaging materials (wood, cardboard, plastic...) and dispose of them se-

parately, in compliance with directives in force at installation site.

Note: Take the protective film off the stainless steel parts by hand before starting the appliance.

Do not use abrasive substances and/or metal objects. Clear any adhesive residues using a sponge soaked in sol-

vent. If the oven is heated up before removing the adhesive film, the removal of the film and cleaning of residues

of glue will be much more difficult.