Aquasana AQ-4050 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Системи фільтрації води Aquasana AQ-4050. Aquasana AQ-4050 2 сторінки. Under-sink adapter kits for use with the aquasana aq-4000
Друкувати сторінку
PRECAUTIONS:
• Read all instructions carefully
• No constant hydrostatic
pressure line to filter allowed.
• Use teflon tape only. Do not
use plumber's putty.
• For technical support call:
866-2DRINK8
UNPACK THE CONTENTS of the
Under-sink adapter kit and
determine the appropriate location
for the faucet to be mounted. The
faucet may be mounted using an
existing hole for a sprayer nozzle or
other accessory, or by drilling a 7/8˝
hole in the sink or counter-top. We
do not recommend drilling granite
or porcelain sinks unless done by a
professional. Be sure the location of
the faucet allows the outlet spout
to extend slightly past the edge of
the sink.*
*All of our faucets have a 4˝ overhang
CONTENTS LIST
Open Relief faucet
Mounting Bracket
Screws and Anchors
1/2˝ Plumbing Tee
3/8˝ Plumbing Tee
MOUNT THE FAUCET AS
SHOWN in diagrams A & B.
Mount the filter unit using
the white steel mounting
bracket and screws in figure below.
Make sure that the location of the
filter unit allows the tubing from
the faucet to connect to the base
of the filter without kinking or side
pressure; if the hose is not able to
plug straight into the inlet without
side pressure, it may drip.
TURN OFF YOUR COLD WATER
SUPPLY VALVE and attach
the "T" valve fitting to the cold
water supply line as shown in
figure A or B.
If your cold water supply line is not
a standard line, and does not allow
use of the supplied "T" fittings ,
you will need to purchase a "T'
adapter or saddle valve from your
local hardware or plumbing supply
store. It will need to have a 1/4˝
compression outlet from the "T".
FIGURE A
Brass "T" fitting
FIGURE B
PVC "T" fitting
A
B
A
B