Aquasana EQ-AST-WH-C Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води Aquasana EQ-AST-WH-C. Aquasana EQ-AST-WH-C 12 сторінок. Whole house salt-free water conditioner
Також для Aquasana EQ-AST-WH-C: Інструкція з монтажу (5 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінку
7
Configure System
Fit Salt-Free Water Conditioner tank and additional optional add-ons
into the system at this time. Screw Pre-Filter support bracket onto
the wall and attach Pre-Filter.
Properly connect system together accordingly (slip fittings, barbed
fittings, NSF certified PVC glue, etc.). Ensure all parts are flowing
through the "IN" port in the correct direction of water flow.
8
Final System Check
Once installation is complete, allow proper time for glue to dry
according to manufacturer instructions. Then, slowly turn water
on and inspect for leaks.
After inspecting for leaks, turn on the faucet closest to the
installed unit and allow water to run for 5-10 minutes for the
final flushing period.
INSTALLATION STEPS
7