Aquasana WELL WATER Rhino EQ-WELL-UV Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води Aquasana WELL WATER Rhino EQ-WELL-UV. Aquasana WELL WATER Rhino EQ-WELL-UV 12 сторінок. Whole house water filter
Друкувати сторінку
8
Configure System
Fit Rhino tank and additional optional add-ons into the system at this
time. Screw Pre-Filter and Post-Filter support brackets onto the wall
and attach filters.
Properly connect system together accordingly (slip fittings, barbed
fittings, NSF certified PVC glue, etc.). Ensure all parts are flowing
through the "IN" port in the correct direction of water flow.
Follow instructions in separate UV Filter installation manual at this
time to mount and install UV Filter. Use PVC pipe, elbows and
reducers to connect from post filter to UV inlet.
9
Final System Check
Once installation is complete, allow proper time for glue to dry
according to manufacturer instructions. Then, slowly turn water
on and inspect for leaks.
After inspecting for leaks, turn on the faucet closest to the
installed unit and allow water to run for 5-10 minutes for the
final flushing period.
INSTALLATION STEPS
7