Panasonic AG-DVX100B Налаштування - Сторінка 28

Переглянути онлайн або завантажити pdf Налаштування для Відеокамера. Panasonic AG-DVX100B. Panasonic AG-DVX100B 42 сторінки. Mini-dv camera-recorder (ntsc)
Також для Panasonic AG-DVX100B: Технічні характеристики (12 сторінок), Технічні характеристики (12 сторінок), Посібник користувача (20 сторінок)

Друкувати сторінку

DV CMD SEL:

This item sets the record function performed by the backup unit when

the START/STOP button on the camcorder is pressed. There are two choices

REC_P: Allows switching between recording and pause.

STOP: Allows switching between recording and stop.

Note:

Used when backup unit does not have a pause mode

Rec Lamp:

this item allows the user to control the tally lights, OFF turns both tally lights

off. The Front tally lamp selection allows the front tally lamp to function only. Rear selec-

tion allows the rear tally lamp to function only. Both allows both tally lamps to function.

Note: The tally lamps supply you with additional information:

Tally Lamp

8 blinks per second

4 blinks per second

1 blink per second

Beep sound

this item allows the user to turn the beep sound ON or OFF. When the

beep tone is sounded the audio signals from the output connectors are muted, and the

beep tone is output instead. When turned on, the beep tone have different meanings.

Beeps

1 beep Sound

2 beep Sounds

10 beep Sounds

Clock Set

This item allows the user to set the internal time and calendar of the Camcor-

der. The Year, Month, day, Hour and minutes. Which is held by an internal battery.

Time Shift

When you travel, this item allows the user to set the time for different time

zones and countries without changing his original home time (CLOCK SETTING) setting.

This item effects both the viewfinder, LCD and the clock time recorded on the tape. This

adjustment is done in 1 hour increments, from +23 to –23 Hours and also a OFF position

which is the factory default.

Operation

When a remote operation has been received.

When Recording has started.

When the video tape has come to the end.

When a problem has arisen in the tape transport.

When there is little tape or battery charge remaining.

When the power has been turned on.

When you start to record.

When recording has been temporarily stopped.

When the cassette tape has not been inserted.

When the unit is in the pause mode.

When condensation has formed inside the Camcorder.

When a problem has occurred in the Camcorder.

Operation