Panasonic AGHVX200P - MEMORY CARD CAMCORDER Інформаційне меню - Сторінка 8
Переглянути онлайн або завантажити pdf Інформаційне меню для Відеокамера. Panasonic AGHVX200P - MEMORY CARD CAMCORDER. Panasonic AGHVX200P - MEMORY CARD CAMCORDER 25 сторінок. Panasonic broadcast camcorder mechanical parts list
Також для Panasonic AGHVX200P - MEMORY CARD CAMCORDER: Перелік деталей (11 сторінок)
Друкувати сторінку
Setup menu list (continued)
SCENE FILE screen (continued)
Item
SKIN TONE DTL
P2
TAPE
V DETAIL FREQ
P2
TAPE
NAME EDIT
P2
TAPE
SAVE/INIT
P2
TAPE
CAMERA SETUP screen
Item
ASPECT CONV
P2
TAPE
SETUP (P2)
P2
SETUP (TAPE)
TAPE
102
Display
mode
(Camera) Sets the skin tone details. Select ON to reduce the skin tone details and soften
the skin tone.
ON OFF
(Camera) Sets the vertical detail for shooting in 480i progressive mode.
THIN
: Makes the detail thin.
MID : Makes the detail slightly thicker.
THICK : Makes the detail thicker.
When images were shot in the progressive mode in which the vertical detail is
set as "THIN" or "MID" and are played on a monitoring television (60i interlace),
you will see ickers caused on horizontal lines and almost horizontal oblique
lines. When playing back images in the progressive mode or when editing
images or performing other postprocessing, images with a higher resolution will
be obtained with the THIN or MID setting than with the THICK setting.
(Camera) Edits the name of the selected scene le you have selected with the scene le
dial.
(Camera) SAVE:
Saves the changed scene le settings.
• The settings will not be saved if you exit the menu mode, switch to the MCR/
VCR mode or turn the camera off without selecting SAVE.
INITIAL:
The settings of the scene le selected with the scene le dial are returned to
the factory settings.
Display
mode
(Camera) Selects the aspect ratio of the image you record in 480i format. This item cannot
be selected when the 1080i or 720P recording format is used. (Page 44)
NORMAL
LETTER BOX
SQUEEZE
(Camera) Switch the setup level of video signals in 480i format using a P2 card.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.5%A:
Setup is switched to 7.5% for the camera output and 0% for the recording.
(Camera) Switch the setup level of video signals in 480i format using a tape.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.5%:
Setup is switched to 7.5% for both the camera output and the recording.
Description of settings
Description of settings
indicates the factory setting.