AquaScape 91018 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Насоси для ставків AquaScape 91018. AquaScape 91018 16 сторінок. Skimmer and pondless waterfall vault pump
Також для AquaScape 91018: Інструкції та обслуговування (16 сторінок)

Друкувати сторінку

1. Installation

• Always operate the pump fully submerged; or if using

in-line, ensure a constant source of fresh water. Failure to

do so may overheat the pump and cause it to fail, voiding

the warranty.

• Use only in fully assembled state, paying particular

attention to ensure that both the outer and inner filter

screens are attached to the pump. Failure to operate the

pump without the filter screen will allow large debris to

enter the pump and cause the pump to fail, voiding the

warranty.

• Do not wear loose clothing that may become entangled in

the impeller or other moving parts.

• Keep clear of suction and discharge openings. DO NOT

insert fingers into pump with power connected.

• Do not pump hazardous materials or liquids, such as oil,

saltwater or organic solvents.

• Do not block or restrict discharge.

• Products returned must be cleaned, sanitized, or

decontaminated, as necessary, prior to shipment to

ensure that employees will not be exposed to health

hazards in handling said material. All applicable laws and

regulations shall apply.

Model Number

Maximum Flow Rate (GPH)

Maximum Head Height

Motor Type

Wattage

Amperage

Power Cord Length

Pump Discharge Diameter

Ideal Pipe Diameter

Pump Dimensions

Installation

• Do not submerge the

AquaSurge pump

directly into the pond.

The AquaSurge pump is

designed to be placed

inside a skimmer, Pondless

Waterfall Vault, sump or

basin. Please consider

Aquascape AquaForce

solids-handling pumps

(Ex. 1) if your application does not have a filter and

requires a pump that can be placed directly into the pond.

AquaSurge Pond Pump Specs

2000

2,193

12.5'

Asynchronous

160

1.3

20'

1.5" MPT

1.5" - 2"

12"L x 5.5"W x 7"H

AquaForce

Pond Pump

• The AquaSurge Pond Pump is a thermally protected,

submersible pump for outdoor or indoor use and has been

evaluated for use with water only.

IMPORTANT: Aquascape, Inc. is not

responsible for losses, injury, or death

resulting from a failure to observe these safety

precautions, misuse or abuse of pumps or

equipment.

AquaSurge Pond Pump Specifications

• Input Voltage: 120V AC

• Input Frequency: 60 Hz

• Submersible pump

• For outdoor or indoor use

• Thermally protected

• This pump has been evaluated for use with water only

• Input amps & wattage: see chart below

3000

3,196

15'

Asynchronous

165

1.4

20'

1.5" MPT

1.5" - 2"

12"L x 5.5"W x 7"H

• The AquaSurge pump is designed to be installed

horizontally on the rubber feet. The pump can also be

mounted vertically, if needed, by attaching the filter stand

ring on the outer filter screen, included with your pump

(Ex. 2).

Ex. 1

☎

US (866) 877-6637 |

4000

3,947

18.5'

Asynchronous

215

1.82

20'

1.5" MPT

1.5" - 2"

14"L x 6"W x 7.5"H

CAN (866) 766-3426 | aquascapeinc.com

5000

5,284

24'

360

20'

1.5" MPT

Ex. 2