AquaScape PRO-Fit Інструкція з монтажу та посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Фільтр для басейну AquaScape PRO-Fit. AquaScape PRO-Fit 8 сторінок. Classic skimmer

Друкувати сторінку

STEP 9

Connecting the Check Valve to the Pump

• If you have helpers, while the

waterfall is being constructed,

one person could be working on

the installation of the pump,

check valve, filter mats, and

overflow. (fig. 19 and fig. 0)

Important: Bring the pipe through the

back of the skimmer before attaching

the fittings.

• Remove the threaded collar and

slip the pipe adapter from the

check valve. Make sure that you

Check valve assembly.

Fig. 0

Feed flex PVC pipe through

back of skimmer first.

STEP 10

Fill Pond

Fill up the pond with water. The

pond should be filled just below the

level of the overflow in the skimmer.

put the threaded collar on the

pipe before you glue the fitting

on the pipe.

• Slide the threaded collar onto

the flexible PVC pipe.

• Using the flexible PVC primer

and glue, attach the slip pipe

adapter to the flexible PVC pipe,

and thread the check valve into

the pump discharge and place

the pump into the skimmer box.

End

Collar

Cap

Piece

Slide collar piece over PVC, then

glue pipe end cap to PVC tubing.

Overflow:

Attach bulkhead & pipe adapter. Set desired pond level from this point using a

transit, a water level tool, or a string level. Drain water at least a few feet away from

skimmer using a piece of 2 in. Flex PVC piping.

The overflow

pipe must be

sloping away

from the

skimmer to

prevent water from going into the

skimmer during heavy rains.

Slide collar up to check valve and

hand tighten. It's as simple as that!

Pond Overflow

Fig. 19

Pump

Electrical

Cord Slot

Over Flow

Opening

Pipe

Discharge

Opening

WFV

Rear View

Skimmer Vault: