Panasonic WV-SP305 Посібник з монтажу - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник з монтажу для Відеокамера. Panasonic WV-SP305. Panasonic WV-SP305 36 сторінок. Ip video cameras
Також для Panasonic WV-SP305: Технічні характеристики (2 сторінок), Порівняльна таблиця (6 сторінок), Особливості та технічні характеристики (2 сторінок), Специфічні катіони (2 сторінок), Інтеграційна примітка (8 сторінок)

When the focus ring is positioned near the best focus position, the position will automatically

be memorized as the "PEAK HOLD" position.

When the focus ring is moved, the current focus position will be indicated on "INDICATOR"

Adjust the focus position so that the indicator value goes close to the "PEAK HOLD" position.

When the indicator value goes to the best focus position, "BEST FOCUS" will be displayed in

reverse at the lower right corner of the screen.

Press the focus assist button again to close the "FOCUS ADJUSTMENT" menu. (No operation

for 3 seconds also closes the menu.)

Note:

• The most common use of a varifocal lens

Note that the adjustment method is different depending on the type. For further information,

refer to the operating instructions for the lens to be used.

When positioning the zoom ring at a step short of the "T" (or "W") end, the focus adjustment

will be easier.

• Depending on the lens to be used, if the zoom ring is fully rotated in the "W" direction, the

periphery may become dark. In such a case, rotate the zoom ring in the "T" direction for read-

justment.

• When shooting the following subjects, close the "FOCUS ADJUSTMENT" menu by pressing

the focus assist (F.A.) button again, and adjust the focus to obtain the best focus position while

monitoring images from the camera.

• Place where the lens easily becomes dirty

• Subj. moving frequently or having large illuminance change

• Subj. with low illuminance

• Subj. with reflection or extra brightness

• Subj. through a window

• Subj. with less contrast such as white wall

• Subj. with heavy flicker

• In case the angular field of view has changed during adjustment, close the "FOCUS

ADJUSTMENT" menu once by pressing the focus assist (F.A.) button. (When the angular field

of view changes, the indicator values of "PEAK HOLD" and "INDICATOR" also change.) After

fixing the angular field of view, retry Step 3.