Diamond Audio D580 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Diamond Audio D580. Diamond Audio D580 12 сторінок.

OPERATION

Movie Mode

Connect to a Computer

Video mode: 1920x1080 FHD 30fps

Film cutting time: 3 minutes, 5 minutes, 10 minutes.

Voice recording: on/off

Explanatory note: record the sound simultaneously when the video is recorded.

When the voice recording is closed, it can ensure the video shot is silent.

General Settings

Key tone: on/off

Auto off: Never, 1 minute and 5 minutes

When set to 1 minute or 5 minutes the system will shut down automatically after no

motion for this duration of time.

Clock setting: Set the current date and time

Date Format: Set how you want the date to appear

Stamp: on/off

Note: the left bottom will display the set date and time when recording or taking a

picture.

Flicker frequency: 50Hz and 60 Hz

LCD Power Save: off, 1 minute or 3 minutes

Explanatory note: after the camera is not operated for X minutes, the camera will

turn off the LCD screen. Press any key to display LCD screen.

Power Save Mode: Black/Time

Note: when set to time display will show the date and time.

Protect Level: closed, high, middle and low.

Note: the vibration video is locked, the greater the grade, the higher the sensitivity.

Time Zone Select: select current time zone (GMT+/-)

System reset: conﬁrm and cancel

Note: after the system is reset, the function of camera will return to default state.

Format SD card: conﬁrm and cancel

Note: conﬁrm to format SD card in the camera.

Language

1. Language setting, press the

Enter the system setting menu, Press

"Language Selection", press

2. Time and time zone settings:

For ﬁrst use, please ﬁrst go to system menu and access to "clock setting" optio

to set the current date and time or connect the GPS module to automatically

synchronizes the time.

3. Other personalized settings can be done in the system menu.

menu button

up key or

button to select the language. Press

down key to enter

to exit.