Diamond Audio Technology CM341m Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільні колонки Diamond Audio Technology CM341m. Diamond Audio Technology CM341m 10 сторінок. Cm3 series convertible speaker systems
Друкувати сторінкуComponent System Wiring
1. Remove crossover from mid bass using crossover detachment instruc-
tions.
2. Plug provided tweeter wire male terminals into the inside terminal holes
marked "TWT" on the crossover taking note of polarity. (wire w/ white
stripe is positive)
3. Connect the female ends of the tweeter wire to the tweeter leads. (red
lead is positive)
4. Plug provided mid bass wire male terminals into the outside terminal
holes marked "WFR" on the crossover taking note of polarity. (wire with
white stripe is positive)
5. Connect the female ends of the mid bass wire to the outside terminals
on the mid range, also marked "WFR". (take note of polarity)
6. Mount the crossovers using the provided zip ties to a secure location
through the center hole in crossover module.
7. Connect speaker wire from source to terminals on crossover and play.
Mid Range
-
+
(OUTPUT)
WFR
TWT
TWT
WFR
CM361
+
-
(INPUT)
(close up of crossover inputs)
Tweeter
Crossover