AquaSure AS-F110CB Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води AquaSure AS-F110CB. AquaSure AS-F110CB 12 сторінок. Whole house
Друкувати сторінку
- 1. Table of Contents
- 2. Inspection & Preparation
- 3. Be Familiar with the System before Installation
- 4. System Operation Parameter and Installation Checklist
- 5. Installing the System
- 6. STEP 1. Shutting off the Main Water Supply Valve
- 7. STEP 2. Mounting the System
- 8. STEP 3. Attaching the Water Supply Pipe
- 9. STEP 4. Installing the Filter
- 10. STEP 5. System Startup
- 11. System Maintenance
- 12. STEP 2. Removing the Filter Housing
- 13. STEP 3. Install the New Filter
- 14. STEP 4. System Startup
- 15. Limited Product Warranty
STEP 1.
Shutting off the Main Water Supply Valve
1. Locate the main water supply valve of the house and turn off completely by turning the
shut-off handle clockwise.
2. Test to see if the water is completely shut off by turning on the faucet in the cold water
position. If the cold water cannot be shut off, please contact your local plumber to fix the
valve before begin installing the system.
STEP 2.
Mounting the System
1. Position the system on the wall at the desired mounting location with minimum of 6 in
ground clearance from the floor to the base of the system.
2. Using a pen or pencil and mark the mounting hole on the back of the bracket onto the
wall.
Note: Please make sure the bracket mount is leveled using a leveling tool to ensure evenly
distributed stress on the bracket. Make sure the mounting point is position on a stud to
properly secure the bracket.
3. Mount the system onto the wall using the provided Lag Bolt and Washer.
AQUASURE
FORTITUDE V SERIES
5