Aquatec OCEAN XL Інструкція з експлуатації Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Інвалідний візок Aquatec OCEAN XL. Aquatec OCEAN XL 10 сторінок. Commode
Друкувати сторінку
3
Description
3.1
Scope of delivery
The AQUATEC OCEAN or the AQUATEC OCEAN XL
are supplied with the following parts (fig. 1):
1
Operating instructions (in plastic bag)
2a Backrest with cover and armrests (OCEAN)
2b Backrest with cover and armrests (OCEAN XL)
3
Seat frame with seat plate
4
Side sections with casters (2 x)
5
Footrests with heel loops (2 x)
6
Clips (2 x) for footrests (inserted)
Enclosed loose in bag:
7
Clips (4 x) for seat frame
8
Allen key (4 mm)
9
Screws (4 x) and curved washers (4 x)
3.2
Accessories
The grip wheels with locking brake are supplied with
the following parts (fig. 2):
1
Grip wheels (2 x)
2
Locking brake (2 x)
3
Hub (2 x)
Please note that the dimensions of the chair are differ-
ent when the grip wheels are fitted. This information
can be found in the Technical data.
3.3
Technical data
Dimensions
Width (OCEAN)
Width (OCEAN XL)
Width with grip wheels
Depth
Depth with grip wheels
Height
Seat width
Seat depth
Seat height
Min. width between
side sections
Min. distance between floor
and holder for the sanitary pan
Weight
Load capacity (OCEAN)
Load capacity (OCEAN XL)
The label (fig. 8 or 9) provides important technical in-
formation.
The label is attached to the inside of the right side sec-
tion.
EN
You can easily disassemble the commode into its com-
ponent parts (section 3.1) for transport.
For detailed instructions on how to dismantle the de-
vice, please refer to section 5.
5.1
5.1.1
1.
2.
3.
560 mm
640 mm
675 mm
934 mm
4.
1060 mm
964
1094 mm
−
480 mm
5.
450 mm
477
600 mm
−
approx. 381 mm
approx. 408 mm
approx. 15 kg
6.
130 kg
150 kg
7.
4
Transport
5
Setting up
Important!
P
Before setting up, inspect all parts for dam-
age during transport.
P
This section describes the assembly. Disas-
sembly is carried out in reverse order.
P
During assembly, make sure the parts are
positioned correctly in relation to each other
(fig. 1).
Assembling the commode
Assembling the side sections
Take the enclosed clips (7, fig. 1) out of the bag.
Place the seat frame on one side.
Important!
P
Push in the side section evenly and do not
jam it.
P
Fasten the side section at the same height
at the front and back.
Push the side section (1, fig. 3) with the guides for
the footrests (4, fig. 3) forwards onto the seat
frame (3, fig. 3).
Align the clip recesses (5, fig. 3) at the front and
back of the side section with a hole on the seat
frame (2, fig. 3).
Push the clips (6, fig. 3) from outside into the side
section until the two lugs (7, fig. 3) enclose the
seat frame tube (3, fig. 3).
Important!
The left and right side sections must be adjust-
ed to the same height.
Turn the seat frame around and fit the second side
section in the same way.
Place the seat frame with the fitted side sections
on to the casters.
11