Diamond Group The piranha II Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для М'ясорубка Diamond Group The piranha II. Diamond Group The piranha II 12 сторінок. Tungsten grinder
Друкувати сторінкуNOTCHING YOUR ELECTRODE
The notching feature is located at the right hand side
of your unit. This feature is provided to notch your
electrodes to a point where they can be split in half or
to remove any existing contamination off of a spent
electrode. You should never snap your electrode in half
without notching it first. Snapping your electrode will
cause splintering within your electrode, which will later
result in contamination in your weld.
• Insert your electrode through the slot opening and
push through so the electrode is exiting from opposite
end. Holding both ends, push the electrode towards
the corner of the rotating wheel.
• Once you have notched a sufficient amount of your
electrode on one side, rotate the electrode to notch the
remaining side.
• Once complete, use the Tip/Flat Block to flatten your
electrode and proceed to grind as normal.
Document: DGP-MANUAL-P2 | Piranha II Product User Manual | Released: 5/13 Rev. C
Page 7