Panasonic AW-HS50 Series Брошура та технічні характеристики - Сторінка 3
Переглянути онлайн або завантажити pdf Брошура та технічні характеристики для Цифрова камера Panasonic AW-HS50 Series. Panasonic AW-HS50 Series 4 сторінки. Combining pinp
Також для Panasonic AW-HS50 Series: Посібник (20 сторінок), Посібник (4 сторінок), Посібник (2 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (6 сторінок)
Друкувати сторінку
Small and Powerful:
Small and Powerful:
Small and Powerful:
An Easy-to-Use
An Easy-to-Use
An Easy-to-Use
Camera Controller
Camera Controller
Camera Controller
with Great Features
with Great Features
with Great Features
Remote Camera Controller
AW-RP50
NEW
Simple to connect and operate,
with both IP and Serial control functions
Up to a hundred AW-HE50S/H units can be controlled via IP
connections when using network hub (switching hub).
IP addresses are automatically assigned to the AW-HE50S/H or
AW-HS50 by the Automatic IP Address Setup function.
One remote camera can be controlled simultaneously by up to
five AW-RP50 units via an IP connection.
Connection settings for the AW-RP50 can be configured with a PC.
(configuration software supplied)
IP-control performance depends on network conditions.
Video signals cannot be transmitted via IP.
Connection is not available with using the public network.
Serial Control also Supported
• Up to 5 existing Panasonic pan-tilt heads*, integrated cameras** and box cameras*** such as the AW-HE50S/H, etc.
can be linked using the serial control (RS-422 protocol).
* Compatible models: AW-PH405, AW-PH400 (AW-IF400 is required), AW-PH360, AW-PH650
*** Compatible models: AK-HC1800, AK-HC1500, AW-HE870, AW-E860, AW-E750, AW-E655, AW-E650, AW-E350
Camera 3
Camera 4
Camera 5
Camera 2
Camera 1
Controller
Number of cameras when Serial and
5 RS-422 Ports
an IP are used together: Up to 100
Linking the AW-HS50 to IP control enables
highly efficient and stress-free operations
The camera setting information (such as iris and gain) acquired
by the unit is displayed through the AUX output of the switcher
or on the split-screen of MultiViewer.
Acquires the ON AIR tally information of the switcher and lights
the tally LED on the panel.
Bus images can be changed by linking them to the camera
selection. (Control bus targets : AUX, PVW, PinP, KEY-F)
The switcher's MultiViewer screen can be changed to the camera
image full screen with a one-touch button operation.
(Control bus target : AUX only)
Parameters such as the PinP position of the switcher can be
changed with the pan/tilt lever.
AW-RP50 Main Specifications
IPv4, RS-422 (Panasonic AW series protocol)
Protocol
Serial : Up to 5 cameras
Connection
IP : Up to 100 cameras
Interface
Remote
(Up to 100 when Serial and IP are used together)
Camera
Pan/Tilt, Zoom, Focus, Iris, Gain, Pedestal, Shutter,
Adjustment
Control
Detail,White Balance (Auto, R/B Gain),
Operating Temperature
functions
Black Balance (Auto, R/B Pedestal), Switch scene files
Operating Humidity
Preset Memory
Up to 100 sets
Power Supply/
Connection
IP : 1
Power Consumption
Switcher
Switcher supported
AW-HS50
Dimensions
Control
(W x H x D)
Camera information display, Tally information imported,
Linkage
Bus material selection (AUX/PVW/PinP/KEY-F),
Weight
Parameter Changes (Pan/Tilt lever, Zoom button)
Standard Accessories
Conventional
Camera 1
Camera 1 Camera 2
Camera 3
Camera 4
Controller
Controller
Each camera could not be operated
by multiple controllers
Controlled
Camera 2
Camera 1
Camera 3
Via IP
........
Up to 100
cameras
can be
connected.
HUB
PC
Controller
Controller
Each camera can be operated
by multiple controllers
** Compatible model: AW-HE100
Camera 3
Camera 4
Camera 5
Camera 2
UP to 95 AW-HE50 units
Camera 1
Controller
Multi-interface Cable (AW-CA20T6)
RS-422
LAN
Conventional
Camera 1
Camera 2
Camera 3 Camera 4
Camera 5
Switcher
Controller
Previously, single operator system control
was hard to achieve.
Controlled
Camera 2
Camera 1
Camera 3
Via IP
........
Up to 100
cameras
can be
connected.
HUB
Controller
Switcher
50 Series Switcher and Controller linked
for streamlined operation.
LAN
10BASE-T/100BASE-TX (for IP control)
RJ45 x 1
TO PAN/TILT HEAD
RS-422 (for Serial control)
RJ45 x 5
TALLY INPUT x 5 channels
D-sub 15 pin
TALLY/GPI
GPI INPUT x 4 channels
(female) x 1
GPI OUTPUT x 4 channels
0 ℃ to +40 ℃ (32 °F to 104 °F)
10 % to 90 % (no condensation)
DC12 V ±10 % (AC adapter provided), 0.5 A
DC IN x 1
210 mm x 67 mm x 177 mm
(8-1/4 " x 2-5/8 " x 6-15/16 ") (excluding protrusions)
Approx. 1.1 kg (2.4 lbs.) (without options)
AC Adaptor, Power Cable
Be sure to use the included AC adaptor and power cable
Full rack size with the AW-RP 50 and AW
Actual Size
177 mm
( 6-15/16 " )
67 mm
( 2-5/8 " )
210 mm ( 8-1/4 " )