Panasonic BB-HCM580A Інтеграційна примітка - Сторінка 2
Переглянути онлайн або завантажити pdf Інтеграційна примітка для Цифрова камера Panasonic BB-HCM580A. Panasonic BB-HCM580A 10 сторінок. Power over ethernet (poe) zoom mpeg-4 network camera
Також для Panasonic BB-HCM580A: Посібник з експлуатації (4 сторінок)
Друкувати сторінку
I
O
NSTALLATION
VERVIEW
Installing the Panasonic camera can be broken down into the following steps:
1. Install cameras at desired locations, and pull power and Cat5 cabling as needed. Refer to the
Panasonic documentation for mounting details.
2. Connect the cameras electrically to the home network and configure the cameras. See Camera
Configuration.
3. Integrate the cameras into the OneHome system and test proper operation. This step is outlined
in HomeLogic Configuration Details.
C
C
AMERA
ONFIGURATION
The camera configuration is done with software provided by Panasonic, which must be run from a
computer with Windows also connected to the same network as the camera.
The software program from Panasonic is EasyConfig.exe: the version we checked is shown at the top.
I
N
MPORTANT
OTES
1. Cameras must be configured one at a time: If you are installing more than one camera, setup
the first one completely before powering up subsequent cameras.
2. Setup the camera within 20 minutes: Initial settings must be made within 20 minutes of the
camera being turned on. If the camera has been powered up for more than 20 minutes, cycle
power to the camera before proceeding.
3. DON'T LOSE THE CAMERA PASSWORD: During setup you will create a user name and
password, which are required to make any other changes in the future. If you lose the user name
or password you will have to factory reset the camera and repeat this entire procedure.
4. DEFAULT USER NAME / PASSWORD: For Panasonic cameras, our default user name is
Administrator and our default password is password.
S
P
TARTING THE
ANASONIC
1. Insert the CD from the camera into your PC: It should autostart the Network Camera Setup
software. If it does not, launch Setup.exe from the Panasonic CD.
2. The following Screen appears. Choose Search for Cameras.
C
S
AMERA
OFTWARE
2 of 10