Panasonic DMC-FH10P Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Цифрова камера Panasonic DMC-FH10P. Panasonic DMC-FH10P 38 сторінок.
Також для Panasonic DMC-FH10P: Посібник користувача (2 сторінок)
Друкувати сторінку
6 Service Mode
6.1.
Error Code Memory Function
1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery,
the battery is pulled out) The error code is memorized to Flash-ROM when the unit has just before powered off.
2. How to display
The error code can be displayed by ordering the following procedure:
• Preparation
- Attach the Battery.
(Since this unit has built-in memory, it can be performed without inserting memory card.)
1. Turn the Power on.
2. Press the [ MODE ] button, and select the [ NORMAL PICTURE ] mode by Cursor buttons, then press the [ MENU/SET ]
button.
3. Turn the Power off.
(If the unit is other than [ NORMAL PICTURE ] mode, it does not display the initial settings menu.)
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
Press the [ PLAYBACK ] button ,"[ UP ] of Cursor button" and "[ W ] side of Zoom button" simultaneously, turn the Power on.
• Step 2. Execute the error code display mode:
Press the [ PLAYBACK ] button in order to enter the [ PLAYBACK ] mode.
Press in order of [ PLAYBACK ] button, [ SHUTTER BUTTON ] fully, and "[ LEFT ] of Cursor button".
Finally those states are press simultaneously.
The display is changed as shown below when the above buttons are pressed simultaneously.
Normal display → Error code display → Operation history display →Normal display →.....
Example of Error Code Display
15