Diamond Kinetics DKST01 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Diamond Kinetics DKST01. Diamond Kinetics DKST01 11 сторінок.

Друкувати сторінку

GETTING STARTED

What comes in the Box

Sensor
Sensor Strap
Works with the Free Diamond Kinetics Mobile App

USING YOUR DIAMOND KINETICS SENSOR

Attaching your Sensor to your Bat

Place the end of your bat on a firm surface with the knob pointing upward.
Stretch the round hole in the center of the sensor strap over the knob.
Position the sensor, with the soft rubber side downward, on top of the bat knob.
Hold the sensor in place with your finger.
Pull each of the three strap ends over the top of the sensor so that the top of
the sensor should remain completely free of the strap.
Confirm that the sensor is firmly secured.
Your Diamond Kinetics sensor should be attached to your bat on the knob end
only using a Diamond Kinetics strap. Do not use any other mechanism to attach
your sensor to you bat; doing so will void the manufacturer's warranty.

Turning On and Off your Sensor

4
August 2014
USB Charging Cable Protective Storage Pouch