Panasonic DMC-FT2 Базова інструкція з експлуатації - Сторінка 23
Переглянути онлайн або завантажити pdf Базова інструкція з експлуатації для Цифрова камера Panasonic DMC-FT2. Panasonic DMC-FT2 40 сторінок. Brochure
Також для Panasonic DMC-FT2: Брошура (2 сторінок), Базова інструкція з експлуатації (36 сторінок)
Друкувати сторінку
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on:
The [CHARGE]
indicator turns off:
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 ºC to 35 ºC (50 oF
to 95 oF).
–
The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
Charging time
∫ Approximate operating time and number of recordable pictures
Number of recordable pictures
Recording time
Playback time
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].
•
Normal Picture Mode
•
Temperature: 23 oC (73.4
•
Using a Panasonic SD Memory Card (32 MB).
•
Using the supplied battery.
•
Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [AUTO].)
•
Recording once every 30 seconds with full flash every second recording.
•
Changing the zoom magnification from Tele to Wide or vice versa in every
recording.
•
Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
The [CHARGE] indicator
charging will start.
The [CHARGE] indicator
off once the charging has completed without any
problem.
o
F)/Humidity: 50% when LCD monitor is on.
is turned on and
A
of the charger will turn
A
Approx. 130 min
Approx. 360 pictures
Approx. 180 min
Approx. 300 min
(ENG) VQT2M41
23