HP 12500 Series Командний довідник - Сторінка 22

Переглянути онлайн або завантажити pdf Командний довідник для Перемикач HP 12500 Series. HP 12500 Series 34 сторінки. 20gbps vpn firewall module
Також для HP 12500 Series: Технічний паспорт (8 сторінок)

Друкувати сторінку

To successfully disable enhanced IRF mode with the undo irf mode enhanced command after

•

you enable it in IRF mode, make sure that the IRF fabric has no more than two member

devices and each member device has only one IRF port to which one or more physical ports

are bound.

To successfully merge IRF fabrics, make sure the enhanced IRF mode is enabled or disabled on

•

each member device. Devices that use different enhanced IRF mode settings cannot merge

into one IRF fabric.

To merge IRF fabrics operating in enhanced IRF mode, you must manually reboot at least the

•

(M-1) member devices to complete the IRF merge. (The letter "M" represents the total number

of member devices in all IRF fabrics.)

After the enhanced IRF mode is enabled, you cannot create Layer 3 Ethernet interfaces or

subinterfaces or Layer 3 aggregate interfaces or subinterfaces.

Examples

# Enable enhanced IRF mode in standalone mode.

<Sysname> system-view

[Sysname] irf mode enhanced

# Enable enhanced IRF mode in IRF mode.

<Sysname> system-view

[Sysname] irf mode enhanced

irf priority

Use irf priority to assign an IRF member priority to a device in standalone mode.

Use undo irf priority to restore the default.

Syntax

irf priority priority

undo irf priority

Default

IRF member priority is 1.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

priority: Specifies an IRF member priority value in the range of 1 to 32.

Usage guidelines

Member priority is used for role election. The greater the priority value, the higher the priority. A

member with higher priority is more likely to be the master.

The member priority configured in standalone mode takes effect after you enable IRF mode.