HP 1910-16G Технічний паспорт - Сторінка 5
Переглянути онлайн або завантажити pdf Технічний паспорт для Перемикач HP 1910-16G. HP 1910-16G 16 сторінок. 1910 switch series
Також для HP 1910-16G: Quickspecs (43 сторінок), Quickspecs (44 сторінок)
Друкувати сторінку
HP 1910 Switch Series
Specifications
HP 1910-48G Switch (JE009A)
Ports
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 48 autosensing 10/100/1000
ports plus 4 1000BASE-X SFP ports, or a combination
Physical characteristics
17.4(w) x 10.24(d) x 1.7(h) in (44.2 x 26.01 x 4.32 cm)
(1U height)
Weight
6.8 lb (3.08 kg)
Memory and processor
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet
buffer size: 512 KB
Mounting
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
Throughput
up to 77.4 Mpps (64-byte packets)
Routing/Switching capacity
104 Gb/s
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size
8192 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative humidity
10% to 90%, noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 10% to 95%, noncondensing
Electrical characteristics
Frequency
50/60 Hz
Achieved Miercom Certified Green Award
Voltage
100-240 VAC
Maximum power rating
59.8 W
PoE power
Notes
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1-03
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
Management
IMC - Intelligent Management Center; limited
command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
Notes
SFP ports and copper ports work simultaneously,
independent of each other, to provide a total of 52
Gigabit Ethernet-capable ports.
Services
3-year, 4-hour onsite, 13x5 coverage for hardware
(UV786E)
HP 1910-24G-PoE (365W) Switch (JE007A)
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000
ports plus 4 1000BASE-X SFP ports, or a combination
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm)
(1U height)
6.8 lb (3.08 kg)
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet
buffer size: 512 KB
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
< 5 µs
< 5 µs
up to 41.7 Mpps (64-byte packets)
56 Gb/s
32 entries (IPv4), 32 entries (IPv6)
8192 entries
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, noncondensing
50/60 Hz
100-240 VAC
523 W
365 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
PoE power is the power supplied by the internal power
supply. It is dependent on the type and quantity of
power supplies and may be supplemented with the use
of an external power supply (EPS).
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited
command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously,
independent of each other, to provide a total of 28
Gigabit Ethernet-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware
(UV786E)
HP 1910-24G-PoE (170W) Switch (JE008A)
24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 24 autosensing 10/100/1000
ports plus 4 1000BASE-X SFP ports, or a combination
17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm)
(1U height)
6.8 lb (3.08 kg)
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet
buffer size: 512 KB
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
< 5 µs
< 5 µs
up to 41.7 Mpps (64-byte packets)
56 Gb/s
32 entries (IPv4), 32 entries (IPv6)
8192 entries
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, noncondensing
50/60 Hz
100-240 VAC
255 W
170 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
PoE power is the power supplied by the internal power
supply. It is dependent on the type and quantity of
power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited
command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports work simultaneously,
independent of each other, to provide a total of 28
Gigabit Ethernet-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware
(UV786E)
5