HP 3100-48 v2 Посібник з монтажу - Сторінка 22

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач HP 3100-48 v2. HP 3100-48 v2 47 сторінок.

Powering on the switch

Before powering on the switch, verify that:

•

The power cord is properly connected.

The power supply voltage meets the requirement of the switch.

•

The console cable is properly connected; the terminal or PC used for configuration has been started;

•

and the configuration parameters have been set.

Powering on the switch

After the 3100-48 v2 switch starts up, the following information is displayed on the terminal screen.:

Starting......

************************************************************************

Creation Date

CPU Clock Speed

Memory Size

Flash Size

CPLD Version

PCB Version

Mac Address

Press Ctrl-B to enter Extended Boot menu...0

Press Ctrl + B at the prompt within one second to access the Boot menu, or wait for the system to

automatically start up.

NOTE:

•

The system has two startup modes: normal startup and fast startup. The normal startup mode requires a

little longer time than the fast startup mode because of more self-test operations.

By default, the system starts up in fast mode and the waiting time is one second. If you set the startup

•

mode to normal, the waiting time is five seconds. The following section describes the setting of the

startup mode.

If you press Ctrl + B within one second, the system displays the following information:

•

Please input BootRom password:

Enter the Boot ROM password (the initial password is null). Then the system displays the Boot ROM menu.

HP 3100-48 v2

Switch

: Jan 13 2011, 16:39:15

: 400MHz

: 256MB

: 128MB

: 001

: Ver.B

: 000fe2100000

BOOTROM, Version 105