HP 316095-B21 - StorageWorks Edge Switch 2/24 Примітка до випуску - Сторінка 12

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 сторінок. Edge switch release notes
Також для HP 316095-B21 - StorageWorks Edge Switch 2/24: Посібник з оновлення (9 сторінок), Посібник (41 сторінок), Посібник (40 сторінок), Примітка до випуску (32 сторінок), Примітка до випуску (27 сторінок), Посібник (26 сторінок), Примітка до випуску (27 сторінок), Примітка до випуску (25 сторінок), Інструкція з монтажу Посібник з монтажу (24 сторінок), Примітка до випуску (23 сторінок), Примітка до випуску (23 сторінок), Примітка до випуску (22 сторінок), Примітка до випуску (23 сторінок), Примітка до випуску (19 сторінок), Примітка до випуску (19 сторінок), Примітка до випуску (18 сторінок), Інструкція з експлуатації (17 сторінок), Примітка до випуску (17 сторінок), Інструкції з оновлення (16 сторінок), Інструкція з експлуатації (16 сторінок), Інструкція з монтажу Посібник з монтажу (16 сторінок), Примітка до випуску (16 сторінок), Примітка до випуску (17 сторінок), Примітка до випуску (11 сторінок)

Друкувати сторінку
HP 316095-B21 - StorageWorks Edge Switch 2/24 Примітка до випуску
recommends that the Edge Switch firmware upgrade be a scheduled maintenance action that anticipates
the failure of switch connectivity. This issue has been resolved with firmware 05.02.00-13 and later.
To safely upgrade firmware on an Edge Switch:
1.
Upgrade HAFM software on the HAFM Server/Appliance to 07.01.00 (minimum).
2.
Download firmware 05.02.00-13 by selecting Firmware Library from the Product Manager
Maintenance menu.
3.
Back up the Edge Switch configuration by selecting Backup & Restore Configuration from the Product
Manager Maintenance menu.
4.
Upgrade the firmware to 05.02.00-13 on each Edge Switch by selecting Send in the Firmware
Library dialog box.
Considerations for downgrading the firmware version
Directors or Edge Switches are not required to be offline before performing a firmware downgrade
operation. Limitations to downgrades are clearly identified if there are any limitations to performing the
operation.
Before downgrading firmware, HP recommends that you back up the Director or Edge Switch
configuration. Refer to the Director or Edge Switch Element Manager user guide for more information.
EWS (HAFM Basic) also provides an option to print or save product configuration to a file. See the HAFM
or EFCM Basic user guide for more information.
Consider the following when downgrading firmware:
•
All installed QPM cards must be removed from the Director 2/140 if downgrading to a version
earlier than 09.00.00. All installed QPM cards must be removed from the Director 2/64 if
downgrading to a version earlier than 09.01.00.
•
All trial PFE key features must be disabled before downgrading to a version earlier than 09.00.00.
•
The domain ID offset must be set to the default value of 0x60 before downgrading to versions
earlier than 09.00.00.
•
WWN Aliases will be disabled when downgrading firmware in any Edge Switch or Sphereon
switch to a release earlier than 09.01.00.
•
Before downgrading to a release prior to 07.00.00, there can be only one user assigned as
Administrator and one user assigned as Operator for HAFM Basic and command line interface
(CLI). If additional users were created, you must delete them before downgrading. Firmware
07.xx.xx does not allow the last user with Administrator rights in HAFM Basic or CLI to be deleted.
If no Operator user exists, firmware 07.xx.xx automatically creates one for each interface during
the downgrade. If more than one Administrator and/or one Operator exists for HAFM Basic
and/or CLI, when attempting to downgrade, you are prompted to delete one of them first.
•
When downgrading to a release earlier than 07.00.00, any modifications to the port RX
BB_Credit settings using the new enhanced port configuration capability must be changed back
to a configuration supported by older firmware. This enables the configuration to comply with the
previous release's configuration database. Firmware 07.xx.xx services verify compatibility and
prevent downloads until the configuration conflict is resolved.
•
Downgrading directly to a release prior to 08.xx.xx from 09.02.00 is not allowed. To downgrade
to a release prior to 08.xx.xx, you must first downgrade to 08.02.00.
•
Upgrades and downgrades are supported only from one major release to the next, such as from
08.xx.xx to 09.02.00. If HAFM Basic is used for upgrades and downgrades, and this rule is not
followed, errors occur and there may be a disruption to attached devices.
•
Downgrading to release 06.xx.xx with the Preferred Path feature configured can cause loss of
this function. HP recommends that Preferred Path be disabled before downgrading. To do this,
deselect the Enable Preferred Path check box in the Configure Preferred Paths dialog box.
•
The Director 2/140 and Edge Switch 2/24 cannot be downgraded to a version earlier than
04.01.00. The Edge Switch 2/12 cannot be downgraded to a version earlier than 05.05.00.
Second-generation Edge Switch 2/12 and Edge Switch 2/24 switches cannot be downgraded to
12