HP ProCurve 5300xl Додатковий посібник - Сторінка 34
Переглянути онлайн або завантажити pdf Додатковий посібник для Перемикач HP ProCurve 5300xl. HP ProCurve 5300xl 38 сторінок. Access controller xl module to the hp procurve 6400cl/5300xl/3400cl
Також для HP ProCurve 5300xl: Технічна специфікація (12 сторінок)
Друкувати сторінкуCommand
show natdhcp
show product
show serial
show sharedsecret
show status
show syslogserver
show temperature
show time
show upgrade
show upgradeproxy
show version
show vlans
show vpn
terminal length <2..1000>
terminal width <61... 1920>
Downloading New Software to the Module
New software is loaded through the Access Control Server or Integrated
Access Manager using the Administrative Console.
Resetting the Module to Factory Defaults
The ACM may be returned to the factory default configuration using one of
the following methods.
Using the factoryreset command in the ACM's extended command
context in the 5300xl CLI.
Boot another, non-ACM module in the slot. This also removes the
encoded ACM configuration information from the show running or
show config command output.
Use the erase startup-config command in the 5300xl CLI.
Return the 5300xl chassis to its factory default configuration using
the Reset and Clear keys on the front panel. (Refer to "Clear/Reset:
Resetting to the Factory Default Configuration" in the Trouble-
shooting appendix of the Management and Configuration Guide for
your switch.) This also resets the ACM.