HP R8S90A Інформація про встановлення, безпеку та нормативну документацію - Сторінка 11
Переглянути онлайн або завантажити pdf Інформація про встановлення, безпеку та нормативну документацію для Перемикач HP R8S90A. HP R8S90A 12 сторінок.
Друкувати сторінку
For manufacturer and local representative information, see Safety and Compliance Information for Server,
Storage, Power, Networking, and Rack Products at
EnterpriseProducts.
Preview of installing an Aruba 6300F/M switch
This section previews the steps for installing the Aruba 6300F/M switches. To find detailed switch installation steps,
information on configuration tools, and other instructions and information, see the latest Installation and Getting
Started Guide for your switch.
1. Prepare the installation site.
2. Unpack the switch and verify that you have received the correct parts.
3. Install a power supply if the switch was not shipped with a power supply already installed.
4. Connect power to the switch and wait for the health LED to turn green after the switch passes the
self-test, then remove power from the switch.
5. Mount the switch.
Mounting restrictions apply. See the "Warning" under "Installation precautions and guidelines".
6. Connect the switch to a power source.
7. (Optional) Install transceivers.
8. Connect the network cables.
9. Configure the switch for network operation.
Documentation feedback
Send any errors, suggestions, or comments to Documentation Feedback
http://www.hpe.com/support/Safety-Compliance-
(docsfeedback-
|
11