HP StorageWorks 8/24 - SAN Switch Примітка до випуску - Сторінка 13

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач HP StorageWorks 8/24 - SAN Switch. HP StorageWorks 8/24 - SAN Switch 32 сторінки. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Також для HP StorageWorks 8/24 - SAN Switch: Технічні характеристики (20 сторінок), Примітка до випуску (30 сторінок), Примітка до випуску (29 сторінок)

Друкувати сторінку
HP StorageWorks 8/24 - SAN Switch Примітка до випуску
Model
HP StorageWorks SAN Director 16 Port 8-Gb FC
blade (FC8-16)
HP StorageWorks SAN Director 32 Port 8-Gb FC
blade (FC8-32)
HP StorageWorks SAN Director 48 Port 8-Gb FC
blade (FC8-48)
HP StorageWorks SAN Director 6 Port 10-Gb ISL
blade (FC10-6)
Fabric Manager
Data Center Fabric Manager
1
At the time of the Fabric OS 6.1.2b release, HP's latest supported firmware version is actually 6.2.1. HP recommends that
you upgrade to that version, if possible, to take advantage of new features and bug fixes. See the HP StorageWorks Fabric
OS 6.2.1 release notes for details.
2
Using HP StorageWorks Fabric Manager (FM) 5.5 or earlier with Fabric OS 6.1.1 or later can result in problems with Zoning,
Performance monitoring, SYSLOG configuration, FICON wizards, IOD Delay, AAA replication, Port enable/disable and other
functions. Unless you are using Admin Domains, HP recommends that you upgrade to HP StorageWorks Data Center Fabric
Manager (DCFM) 10.3.x to use with Fabric OS 6.1.1 or later. If you are using Admin Domains, HP recommends that you
downgrade Fabric OS to 6.1.0h.
4/256 SAN Director blade support
Fabric OS 6.1.2b is fully qualified and supports the Director blades listed in
Table 3 4/256 SAN Director blade support matrix
Director blade
FC4-16
FC4-32
FC4-48
FC8-16
FC8-32
FC8-48
FC10-6
FC4-16IP (iSCSI blade)
FR4-18i (FCIP/FC Router blade)
2
Earliest compatible ver-
sion
6.1.0d
6.1.0d
6.1.0d
6.1.0d
5.2.0a
10.0.2
Number of blades
Supported with any mix, and up to eight blades of each
type. No intermix restrictions. The 4/256 SAN Director
must run Fabric OS 6.0.0b or later to support the FC8-16
port blade, and Fabric OS 6.1.0a or later to support the
FC8-32 and FC8-48 port blades.
Up to four blades of this type
Up to two blades of this type. Up to eight FR4-18i blades
can be installed if they are used only for FC Fast Write or
FCIP without routing.
HP StorageWorks Fabric OS 6.1.2b release notes
Recommended version
1
6.1.2b
1
6.1.2b
1
6.1.2b
1
6.1.2b
5.5
10.1.4
Table
3.
13