HP StorageWorks XP10000 - Disk Array Посібник з налаштування системи - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з налаштування системи для Перемикач HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 43 сторінки. Cache lun xp
Також для HP StorageWorks XP10000 - Disk Array: Примітка до випуску (13 сторінок), Посібник адміністратора (50 сторінок), Посібник з конфігурації (42 сторінок), Посібник з конфігурації (40 сторінок), Посібник з конфігурації (40 сторінок), Посібник з конфігурації (36 сторінок), Посібник з конфігурації (36 сторінок), Посібник з конфігурації (30 сторінок), Посібник з конфігурації (36 сторінок), Примітка до випуску (5 сторінок), Посібник з налаштування системи (49 сторінок), Посібник з налаштування системи (42 сторінок), Посібник з налаштування системи (35 сторінок), Посібник з конфігурації (46 сторінок), Посібник з конфігурації (46 сторінок), Посібник з конфігурації (40 сторінок), Посібник з конфігурації (44 сторінок), Посібник з конфігурації (38 сторінок), Посібник з конфігурації (34 сторінок), Посібник з конфігурації (30 сторінок), Посібник з конфігурації (30 сторінок), Посібник з конфігурації (42 сторінок), Посібник користувача (30 сторінок)

HP StorageWorks XP10000 - Disk Array Посібник з налаштування системи

Installation procedures

Perform these actions to install and configure the disk array:
1. Install and configure the disk array
Setting the host mode
Setting the System Option Modes
Configuring the Fibre Channel ports
2. Install and configure the host
Loading the OS and software
Installing and configuring the HBAs
Clustering and fabric zoning
Fabric zoning and LUN security
3. Connect the disk array
Restarting the Linux server
Defining the paths
Verifying new device recognition
4. Configure disk array devices
Partitioning the devices
Creating the file systems
Creating the mount directories
Creating the mount table
Install and configure the disk array
The HP service representative performs these tasks:
Assembling hardware and installing software
Loading the microcode updates
Installing and formatting devices
After these tasks are finished, you will use Remote Web Console, Command View,
Command View XP Advanced Edition, or LUN Configuration and Security Manager to
complete the remaining tasks listed below. If you do not have these programs, your HP
service representative can perform these tasks for you.
12
Installation