Diamond Products HDS60 Посібник оператора - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник оператора для Пила. Diamond Products HDS60. Diamond Products HDS60 19 сторінок. Concrete saw

Blade removal and installation

Step 11: Reinstall adjustable arm assembly, blade guard and splash flap on saw.

Hand tighten bolts. Place ring saw on flat surface (figure 11) so that the

adjustable arm assembly is sitting with the weight of the saw on it. Tighten bolts

using the 9/16" wrench provided. Guide rollers should be firmly in contact with

the blade. Move t-handle to original location by pulling up and rotating 90

degrees, returning transmission assembly to the tensioned position.

Figure 11

Step 12: Lay saw flat on table and reinspect blade for play at the guide rollers.

Repeat step 11 if blade is not in firm contact with guide rollers.