Diamond Products DP80350 Посібник оператора - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник оператора для Підлогова машина Diamond Products DP80350. Diamond Products DP80350 11 сторінок. High-speed burnisher
Друкувати сторінкуHandle Release Assembly Instructions
1) Remove nut and spacer from handle
bracket assembly.
2)
Push the two handle brackets backw-
ard so they lean against the rear wheel.
1) Make sure actual cord wrap faces to the left of the machine
when you are standing behind it.
2)
Assemble hardware in the following order spacer, left handle
bracket, nylock nut. (do not over tighten nylock
tighten it enough to hold handle in place when compression
lever is in down position)
STEP 4
1) Connect power cords together.
-5-
STEP 1
STEP 3
STEP 2
1) Remove handle clamp
blocks with 5mm
2)
Place handle assembly into
handle clamp blocks
3)
Re-attach the blocks to the
base with5mm hex head
.
Only
Diamond Products
hex head
Operator's Manual