Panasonic ETJPC200WU Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Проектор Panasonic ETJPC200WU. Panasonic ETJPC200WU 30 сторінок.
Друкувати сторінку
Before installation (continued)
Installation position
Decide the installation position on the wall or ceiling while referring to "Projection related dimension diagrams,"
"Projection distances," and "Mounting hole dimensions."
The following illustrations are examples of the projection lens surface of the main unit of the projector and the
projection surface positioned so that they are facing each other straight. The projection position and projection
screen size can be adjusted on the projector side in accordance with the projection surface position and range.
Projection related dimension diagram
Projection screen
SW
L (LW/LT)
*1
SH
SW
SD
H
*1 LW: Minimum projection distance
LT: Maximum projection distance
Projection distances (when the aspect ratio is 4:3)
The following shows the dimensional relationship between the projector and projection surface.
In addition, some dimension deviation may exist in the following table. Also, when keystone correction is
performed on the projector side, correction is made so that the projected image size becomes smaller than the
specified screen size.
Projected image size
Diagonal (SD)
Height (SH)
0.76 (30")
1.02 (40")
1.27 (50")
1.52 (60")
1.78 (70")
2.03 (80")
2.29 (90")
2.54 (100")
Projection distance (distance from projection lens surface to the projection surface) (m)
Image height (m)
Image width (m)
Screen diagonal size (m)
Distance from the lens centre to one side (the wall or ceiling side to install the
attachment plate) of the projection surface (m)
Width (SW)
0.457
0.610
0.610
0.813
0.762
1.016
0.914
1.219
1.067
1.422
1.219
1.626
1.372
1.829
1.524
2.032
Wall or ceiling
Projection surface
L (LW/LT)
142.5 mm
（5-5/8"）
Projection surface
L (LW/LT)
Projection distance (L)
Min. (LW)
0.79
1.06
1.34
1.62
1.89
2.17
2.45
2.72
Lens center
Pole center
Pole center
Lens center
Pole center
(Unit: m)
Distance from the
lens centre to the
Max. (LT)
end of image (H)
1.75
0.152
2.35
0.203
2.94
0.254
3.54
0.305
4.14
0.356
4.73
0.406
5.33
0.457
5.92
0.508
ENGLISH - 11