Panasonic PT-AE4000E Функціональні інструкції - Сторінка 30
Переглянути онлайн або завантажити pdf Функціональні інструкції для Проектор Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 сторінок. Full high-definition home cinema projector
Також для Panasonic PT-AE4000E: Інструкція з експлуатації Посібник з експлуатації (36 сторінок), Брошура та технічні характеристики (6 сторінок), Функціональні інструкції (50 сторінок)
Друкувати сторінку
PICTURE menu
J DETAIL CLARITY
You can adjust the detail clarity system levels.
Setting range: 0 to +7
J CINEMA REALITY
You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press ◄ ► to select the required setting.
ON:
OFF:
NOTE:
•
CINEMA REALITY
J TV-SYSTEM
When the video signal is changed, the setting
switches automatically.
You can switch the setting manually to match
the video data. Press ◄ ► to cycle through the
options.
AUTO
SECAM
PAL-N
PAL-M
NOTE:
•
AUTO
setting will select from NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM.
J RGB/YP
P
B
The projector will detect the signal from the
COMPUTER terminals if the signal is RGB or
YP
P
. You can turn off the automatic detecting
B
R
system and switch between RGB and YP
manually.
AUTO:
RGB:
YP
P
:
B
R
NOTE:
•
Available with VGA60, 480i, 576i, 480p, 576p,
1 080/60i, 1 080/50i, 720/60p, 720/50p, 1 080/60p,
1 080/50p only.
•
When the input signal is not selected correctly with
AUTO setting, select RGB or YP
E
30 -
NGLISH
Active
Deactive
is effective only with interlace signals.
NTSC
NTSC 4.43
PAL
R
Automatic detecting system
Project as RGB signal
Project as YP
P
signal
B
R
P
manually.
B
R
MEMORY SAVE
You can save and name the adjusted PICTURE menu
settings for instant access from MEMORY LOAD menu.
1.
Adjust the items in
2.
Select
MEMORY SAVE and press the ENTER
button.
3.
Select the required memory setting and press the
ENTER button.
The confirmation screen will be displayed. Select
OK and press the ENTER button.
Indicated with
4.
Name the memory setting.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the ENTER button.
You can enter up to 16 characters.
MEMORY NAME INPUT
5.
Repeat step 4 until you finish the text line.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press ▼ then perform step 4.
6.
Select
OK and press the ENTER button to set the
entered text as a name.
NOTE:
P
•
If you leave the text box empty and save, the default
B
R
memory number will stay as a name.
PICTURE menu.
is in use, and
is empty.
ALL DELETE
OK
CANCEL