Panasonic PT-AE4000E Функціональні інструкції - Сторінка 47
Переглянути онлайн або завантажити pdf Функціональні інструкції для Проектор Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 сторінок. Full high-definition home cinema projector
Також для Panasonic PT-AE4000E: Інструкція з експлуатації Посібник з експлуатації (36 сторінок), Брошура та технічні характеристики (6 сторінок), Функціональні інструкції (50 сторінок)
Друкувати сторінку
Option menu
Select VIERA LINK SETTINGS in the OPTION menu for
the VIERA Link settings.
Available Features
J
Easy playback
Q
Automatic Input Switching - When the connected equipment is operated, input mode is switched automatically.
POWER ON LINK
Q
Set POWER ON LINK "ON" in the Setup Menu to use this function.
When the connected equipment is turned ON, the projector which has been linked with the connected
equipment is automatically turned ON.
POWER OFF LINK
Q
Set POWER OFF LINK "ON" in the Setup Menu to use this function.
When the projector is turned OFF and it is in standby mode, the connected equipment is also automatically
set to Standby.
This function will work even if the projector enters standby mode automatically by SLEEP function.
Reduce unnecessary power consumption in standby (STANDBY POWER SAVE)
Q
Set STANDBY POWER SAVE "ON" in the Setup Menu to use this function.
The power consumption in standby mode of the connected equipment is lowered in synchronization when the
projector is turned OFF to reduce power consumption.
This function will work when POWER OFF LINK is set to ON.
Auto standby for unnecessary equipment (INTELLIGENT AUTO STANDBY)
Q
Set INTELLIGENT AUTO STANDBY "ON (WITH REMINDER)" or "ON (NO REMINDER)" in the Setup
Menu to use this function.
When the projector is ON, non-input selected connected equipment goes into standby mode automatically to
reduce the power consumption.
If you select ON (WITH REMINDER), the on screen message will be displayed to be noticed before this
function is activated.
NOTE:
POWER ON LINK
•
Depending on the connected equipment, the projector might automatically turn ON when some functions of the
connected equipment are performed. (Only when the projector is in standby mode.)
•
Due to the projector's characteristics, warm up time is needed before starting the projection, so please be aware that the
movie might have already started by the time the projector is fully lit.
POWER OFF LINK
•
Depending on the condition of the connected equipment, such as during recording, not all power of the connected
equipment will be switched off.
STANDBY POWER SAVE
•
Depending on the connected equipment, when the projector is turned on, even if the power consumption setting of the
connected equipment is set to the eco-standby mode, it's power consumption is increased so it can startup faster.
INTELLIGENT AUTO STANDBY
•
This function may not work properly depending on the connected equipment. If required, set to
VIERA Link Connection
VIERA LINK SETTINGS
VIERA LINK
POWER ON LINK
POWER OFF LINK
STANDBY POWER SAVE
SELECT
INTELLIGENT AUTO STANDBY
VERSION : HDAVI Control 4
RETURN
ON
OFF
ON
OFF
OFF
OFF.
E
NGLISH - 47