Panasonic PT-DW10000 Посібник з налаштування - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Panasonic PT-DW10000. Panasonic PT-DW10000 17 сторінок. 3-chip dlp projector
Також для Panasonic PT-DW10000: Технічна специфікація (10 сторінок), Технічна специфікація (10 сторінок), Технічні характеристики (12 сторінок), Розміри (1 сторінок), Розміри (1 сторінок), Посібник з налаштування та експлуатації (37 сторінок), Технічні характеристики (11 сторінок), Брошура та технічні характеристики (6 сторінок)

3. Color Matching Adjustment Method

One of the three patterns is selected from "3 Colors", "7 Colors" and "Measurement Mode".

* Projector Setting

The image menu should be unified with the dynamic mode on both projectors, each signal is

separately stored in the memory. Select "graphic" in the case of a PC, and "standard" in the

case of a video. The factory setting for gamma is different in different image modes, and the

brightness and hue do not match between projectors.

Turn off "AI" in "PICTURE" (DW5100/D5700).

Turn off "DYNAMIC IRIS", "DYNAMIC GAMMA" in "PICTURE"

(DW10000/D10000/DW7000/D7700).

Turn off "AUTO SIGNAL" in "OPTION".

Select 2.2 for "GAMMA" in "PICTURE".

Adjustment method for "3 Colors" or "7 Colors"

After adjusting red, then green and blue (cyan, magenta, yellow and white in the case of 7

colors) should be adjusted. Finally, the white balance is adjusted in place of the all white

pattern.

Turn off blending and eliminate the blended

area by using the lens shift, so that the two

images are placed side by side so that the

difference between the two can be perceived

easily.

Match the color of the images using a high

purity color and adding other colors. In the

case shown on the left, green and blue are

added to the left-hand projector, while reducing

red from the right-hand projector.

The key point of manual adjustment is not to

exceed the level of the other side through over

correction. When many projectors are used,

correction should be made while paying close

attention to the adjacent projectors so as to

obtain well-balanced color matching without

sacrificing color range and brightness.

- 16 -