Panasonic PT-F300 Series Технічні характеристики - Сторінка 10
Переглянути онлайн або завантажити pdf Технічні характеристики для Проектор Panasonic PT-F300 Series. Panasonic PT-F300 Series 12 сторінок. Rs-232c control specifications
Також для Panasonic PT-F300 Series: Технічна специфікація (10 сторінок), Брошура та технічні характеристики (6 сторінок), Розміри (1 сторінок), Технічні характеристики (49 сторінок)
Друкувати сторінку
- 1. Specifications
- 2. Lcd Projector
- 3. Standard Setting-Up Positions
- 4. Calculation of the Projection Distance
- 5. Control Commands
- 6. Status Asking Commands
- 7. Parameter Format
- 8. Command Example
- 9. Notes on Projector Placement and Operation
- 10. Direction of Air Intake and Exhaust
- 11. Operating the Projector Continuously
S
F
P
E
C
I
L
LCD Projector
Parameter format
Parameter format
Size (Byte)
<pl>
3 (1 or 2 bytes also
possible when
under control)
<off on>
1
<input signal>
3
<installation>
1
<language>
3
<power condition>
3
<lamp condition>
1
<acctch>
4
<color temp>
1
<date>
8
<time>
6
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.
Command example
To set the volume to +30, send the command as shown below.
STX
Start
NOTE: When sending commands without parameters, a colon (:) is not necessary.
As of May 2009
E
Definition
Decimal without signs: 0-999 (000, 001, 002...999)
Decimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
DVI = DVI-D, RG1 = computer 1, RG2 = computer 2,
NWP = network, VID = video, SVD = S-Video
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
ENG = English, DEU = German, FRA = French, ESP = Spanish,
ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese,
SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish,
CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, KOR = Korean
000 = power on (standby mode on), 001 = power off (standby mode off)
0 = standby, 1 = lamp on under control, 2 = lamp off,
3 = lamp off under control
Dicimal without signs: 0000-9999 hours
0 = low, 1 = default, 2 = high
y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
h1h2m1m2s1s2 = hour (h) minute (m) second (s)
AVL
:
30
Command
Parameter
ETX
End
PT-F300
< 10 >