Diamond Traffic Products TTC-4420 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Касовий апарат Diamond Traffic Products TTC-4420. Diamond Traffic Products TTC-4420 14 сторінок. Trail counter

Друкувати сторінку

Selecting a site where the scanner and reflector can be installed well

off the trail on both sides will minimize tampering by curious people

or vandals.

2. Be careful to avoid selecting sites where people would be likely to stop,

rest or mill around, such as scenic overlooks or level areas at the top of

steep grades.

3. Avoid segments of trail heavily traveled by big game or range stock.

4. Locate 2 trees 15-75 feet apart so that the beam makes a 90-degree

angle with the trail and so that the beam will be at waist height above

the trail.

5. A site that is protected from the sun and weather will produce better

results. However, the infrared receiver does incorporate a filter lens to

remove unwanted light frequencies.

On –Site Installation

The following general procedure is provided on how to install the trail traffic

counter. The installer should feel free to use their ingenuity.

1. Mount the scanner (use three bolts) and reflector on trees as shown in

Figure 2. The scanner can be mounted with the lens assembly on either side

of the tree—there is no "top" of the unit. Use of a string to locate the path

from the scanner to the reflector may be helpful. Attach the string to the tree

near the scanner and run the string to the desired location of the reflector.

Remove any branches or other obstacles in the path.