Panasonic PTL785U - LCD PROJECTOR UNIT Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Panasonic PTL785U - LCD PROJECTOR UNIT. Panasonic PTL785U - LCD PROJECTOR UNIT 20 сторінок. Network function edition
Друкувати сторінку
Network status screen
1
Select [NETWORK] on the screen
discussed on the preceding page,
then press the [ENTER] button.
2
Use the [
parameter, then change its setting.
Parameter
IDs are identification numbers under which settings are stored.
ID
Three different IDs can be stored (LAN1 through LAN3).
Use the [
ON: Select this setting to automatically acquire an IP address
DHCP
OFF: Select this setting if you are not using a DHCP server.
IP
Enter settings in these parameters if you are not using a DHCP
ADDRESS
server.
SUBNET
1. Select a parameter, then press the [ENTER] button.
MASK
2. Use the [
GATEWAY
3. Select [OK], then press the [ENTER] button.
Notes:
• If you are using a DHCP server, make sure it is on and ready.
• IP address, subnet mask, and gateway settings should be obtained from your
network administrator.
] buttons to select a
] buttons to toggle this setting ON/OFF.
using a DHCP server.
] buttons to select numbers and periods, then
press the [ENTER] button.
NETWORK
Description
5
ID
LAN1
DHCP
OFF
ON
IP ADDRESS
192.168.0.8
SUBNET MASK
255.255.255.0
GATEWAY
192.168.0.254
ENTER
ESC
SELECT : [ ] [ ]
ENTER : [ENTER]
ESC : [MENU]